wmi Ichaud_CyclicStreamStatistics reference for Network Programming in .NET with C# & Visual Basic .NET (VB.NET)

WMI class ' Ichaud_CyclicStreamStatistics ' reference for C# and VB.NET

MOF Reference

[WMI, Locale("MS\\0x409"), HeaderName("CyclicStreamStatistics"), Description("Cyclic stream performance statistics."), guid("{7AF2A80A-349C-4624-A6DD-35D01E6B4BA9}")]
class Ichaud_CyclicStreamStatistics
{
	[WmiDataId(1), read, Description("The total number of streams opened.")] uint32 StreamCount;
	[WmiDataId(2), read, Description("Tells total number of 100 nanosecond intervals the DMA has been in the run state.")] sint64 DmaRunTime;
	[WmiDataId(3), read, Description("The total number of bytes transferred by the DMA.")] uint64 BytesTransferred;
	[WmiDataId(4), read, Description("Interrupt on completion count.")] uint32 InterruptOnCompletionCount;
	[WmiDataId(5), read, Description("FIFO error interrupt count.  Enhanced performance monitoring must be enabled for a true count and will effect next stream opened.  If not enabled, a FIFO error won't interrupt but will be noted at the next interrupt.")] uint32 FifoErrorInterruptCount;
	[WmiDataId(6), read, Description("Last valid buffer interrupt count.")] uint32 LastValidBufferCompleteInterruptCount;
	[WmiDataId(7), read, Description("The total nuber of DPCs queued to service the stream.  If there are no errors, this number should equal the number of DPCs queued.")] uint32 TotalDpcsQueued;
	[WmiDataId(8), read, Description("Whether or not the ContentProtect bit has been set.  If it has, this stream may not be recorded.")] uint32 ContentProtectSet;
	[WmiDataId(9), read, Description("Whether or not the DigitalOutputDisable bit has been set.  If it has, digital outputs must be disabled.")] uint32 DigitalOutputDisableSet;
	[WmiDataId(10), read, Description("Current DMA Index == Last DMA Index.")] uint32 CurrentEqualsLastValid;
};

Class properties:

Ichaud_CyclicStreamStatistics.BytesTransferred
Ichaud_CyclicStreamStatistics.ContentProtectSet
Ichaud_CyclicStreamStatistics.CurrentEqualsLastValid
Ichaud_CyclicStreamStatistics.DigitalOutputDisableSet
Ichaud_CyclicStreamStatistics.DmaRunTime
Ichaud_CyclicStreamStatistics.FifoErrorInterruptCount
Ichaud_CyclicStreamStatistics.InterruptOnCompletionCount
Ichaud_CyclicStreamStatistics.LastValidBufferCompleteInterruptCount
Ichaud_CyclicStreamStatistics.StreamCount
Ichaud_CyclicStreamStatistics.TotalDpcsQueued

WMI is a huge subject, so therefore it is practically impossible to provide a comprehensive example program that covers anything. However, the book “Network programming in .NET” (Buy at Amazon UK) (Buy at Amazon US) covers a much wider scope of WMI, and explains how to leverage it to access the bounty of information held within this vast, yet simple object model.

Articles

Contact us

Please use FireFox to view this page

WMI class ' Ichaud_CyclicStreamStatistics ' reference for C# and VB.NET

MOF Reference

Class properties: