wmi Win32_POTSModem reference for Network Programming in .NET with C# & Visual Basic .NET (VB.NET)

WMI class ' Win32_POTSModem ' reference for C# and VB.NET

MOF Reference

[Description("The Win32_POTSModem class represents the services and characteristics of a Plain Old Telephone Service (POTS) modem on a Win32 system."): ToSubClass, AMENDMENT, LOCALE(1033)]
class Win32_POTSModem : CIM_PotsModem
{
	[Description("The DeviceID property contains a string uniquely identifying this POTS modem from other devices on the system."): ToSubClass, key] string DeviceID = NULL;
	[Description("The AttachedTo property indicates the port to which the POTS modem is attached.\nExample: COM1."): ToSubClass] string AttachedTo;
	[Description("The BlindOff property contains the command string used to detect a dial tone before dialing.\nExample: X4."): ToSubClass] string BlindOff;
	[Description("The BlindOn property contains the command string used to dial whether or not there is a dial tone.\nExample: X3."): ToSubClass] string BlindOn;
	[Description("The CompatibilityFlags property lists all modem connection protocols with which this modem device is compatible."): ToSubClass] string CompatibilityFlags;
	[Description("The CompressionOff property contains the command string used to disable hardware data compression.\nExample: S46=136."): ToSubClass] string CompressionOff;
	[Description("The CompressionOn property contains the command string used to enable hardware data compression.\nExample: S46=138."): ToSubClass] string CompressionOn;
	[Description("The ConfigurationDialog property contains the modem initialization string. This property is comprised of command strings from other members of this class."): ToSubClass] string ConfigurationDialog;
	[Description("The Device Control Block (DCB) property contains the control settings for a serial communications device, in this case, the modem device."): ToSubClass] uint8 DCB[];
	[Description("The Default property indicates whether this POTS modem is the default modem on the Win32 computer system."): ToSubClass] uint8 Default[];
	[Description("The DeviceLoader property indicates the name of the device loader for the modem. A device loader loads and manages device drivers and enumerators for a given device."): ToSubClass] string DeviceLoader;
	[Description("The DeviceType property indicates the physical type of the modem."): ToSubClass, Values{"Null Modem", "Internal Modem", "External Modem", "PCMCIA Modem", "Unknown"}: ToSubClass] string DeviceType;
	[Description("The DriverDate property indicates the date of the modem driver."): ToSubClass] datetime DriverDate;
	[Description("The ErrorControlForced property contains the command string used to enable error correction control when establishing a connection. This increases the reliability of the connection.\nExample: +Q5S36=4S48=7."): ToSubClass] string ErrorControlForced;
	[Description("The ErrorControlOff property contains the command string used to disable error control.\nExample: +Q6S36=3S48=128."): ToSubClass] string ErrorControlOff;
	[Description("The ErrorControlOn property contains the command string used to enable error control.\nExample: +Q5S36=7S48=7."): ToSubClass] string ErrorControlOn;
	[Description("The FlowControlHard property contains the command string used to enable hardware flow control. Flow control consists of signals sent between computers that verify that both computers are ready to transmit or receive data.\nExample: &K1."): ToSubClass] string FlowControlHard;
	[Description("The FlowControlSoft property contains the command string used to enable software flow control. Flow control consists of signals sent between computers that verify that both computers are ready to transmit or receive data.\nExample: &K2."): ToSubClass] string FlowControlSoft;
	[Description("The FlowControlOff property contains the command string used to disable flow control. Flow control consists of signals sent between computers that verify that both computers are ready to transmit or receive data.\nExample: &K0."): ToSubClass] string FlowControlOff;
	[Description("The InactivityScale property is a multiplier used with the InactivityTimeout property to calculate the timeout period of a connection."): ToSubClass] string InactivityScale;
	[Description("The Index property indicates the index number for this POTS modem.\nExample: 0"): ToSubClass] uint32 Index;
	[Description("The Model property indicates the model of this POTS modem.\nExample: Sportster 56K External."): ToSubClass] string Model;
	[Description("The ModemInfPath property indicates the path to this modem's .inf file. This file contains initialization information for the modem and its driver.\nExample: C:\\WINNT\\INF."): ToSubClass] string ModemInfPath;
	[Description("The ModemInfSection property indicates the name of the section in the modem's .inf file that contains information about the modem."): ToSubClass] string ModemInfSection;
	[Description("The ModulationBell property contains the command string used to instruct the modem to use Bell modulations for 300 and 1200 bps.\nExample: B1."): ToSubClass] string ModulationBell;
	[Description("The ModulationCCITT property contains the command string used to instruct the modem to use CCITT modulations for 300 and 1200 bps.\nExample: B0."): ToSubClass] string ModulationCCITT;
	[Description("The PortSubClass property contains the string definingthe port used for this modem."): ToSubClass] string PortSubClass;
	[Description("The Prefix property indicates the dialing prefix used to access an outside line."): ToSubClass] string Prefix;
	[Description("The Properties property is a string array that lists all the properties (and their values) for this modem."): ToSubClass] uint8 Properties[];
	[Description("The ProviderName property indicates the network path to the computer that provides the modem services."): ToSubClass] string ProviderName;
	[Description("The Pulse property contains the command string used to instruct the modem to use pulse mode for dialing. Pulse dialing is necessary for phone lines that are unable to handle tone dialing.\nExample: P."): ToSubClass] string Pulse;
	[Description("The Reset property contains the command string used to reset the modem for the next call.\nExample: AT&F."): ToSubClass] string Reset;
	[Description("The ResponsesKeyName property contains the response this modem might report to the operating system during the connection process. The first two characters specify the type of response. The second two characters specify information about the connection being made. The second two characters are used only for Negotiation Progress or Connect response codes. The next eight characters specify the modem-to-modem line speed negotiated in bits per second (bps). The characters represent a 32-bit integer doubleword format (byte and word reversed). The last eight characters indicate that the modem is changing to a different port or Data Terminal Equipment (DTE) speed. Usually this field is not used because modems make connections at a \"locked\" port speed regardless of the modem-to-modem or Data Communications Equipment (DCE) speed."): ToSubClass] string ResponsesKeyName;
	[Description("The SpeakerModeDial property contains the command string used to turn the modem speaker on after dialing a number, and turning the speaker off when a connection has been established.\nExample: M1."): ToSubClass] string SpeakerModeDial;
	[Description("The SpeakerModeOff property contains the command string used to turn the modem speaker off.\nExample: M0."): ToSubClass] string SpeakerModeOff;
	[Description("The SpeakerModeOn property contains the command string used to turn the modem speaker on.\nExample: M2."): ToSubClass] string SpeakerModeOn;
	[Description("The SpeakerModeSetup property contains the command string used to instruct the modem to turn the speaker on (until a connection is established).\nExample: M3."): ToSubClass] string SpeakerModeSetup;
	[Description("The SpeakerVolumeHigh property contains the command string used to set the modem speaker to the highest volume.\nExample: L3."): ToSubClass] string SpeakerVolumeHigh;
	[Description("The SpeakerVolumeLow property contains the command string used to set the modem speaker to the lowest volume.\nExample: L1."): ToSubClass] string SpeakerVolumeLow;
	[Description("The SpeakerVolumeMed property contains the command string used to set the modem speaker to a medium volume.\nExample: L2."): ToSubClass] string SpeakerVolumeMed;
	[Description("The StringFormat property describes the type of characters used for text passed through the modem."): ToSubClass, Values{"ASCII string format", "DBCS string format", "UNICODE string format"}: ToSubClass] string StringFormat;
	[Description("The Terminator property contains the string that marks the end of a command string.\nExample: <cr>"): ToSubClass] string Terminator;
	[Description("The Tone property contains the command string that instructs the modem to use tone mode for dialing. The phone line must support tone dialing.\nExample: T."): ToSubClass] string Tone;
	[Description("The VoiceSwitchFeature property contains the command strings used to activate the voice capabilities of a voice modem.\nExample: AT+V."): ToSubClass] string VoiceSwitchFeature;
};

Class properties:

Win32_POTSModem.AnswerMode
Win32_POTSModem.AttachedTo
Win32_POTSModem.Availability
Win32_POTSModem.BlindOff
Win32_POTSModem.BlindOn
Win32_POTSModem.Caption
Win32_POTSModem.CompatibilityFlags
Win32_POTSModem.CompressionInfo
Win32_POTSModem.CompressionOff
Win32_POTSModem.CompressionOn
Win32_POTSModem.ConfigManagerErrorCode
Win32_POTSModem.ConfigManagerUserConfig
Win32_POTSModem.ConfigurationDialog
Win32_POTSModem.CountriesSupported
Win32_POTSModem.CountrySelected
Win32_POTSModem.CreationClassName
Win32_POTSModem.CurrentPasswords
Win32_POTSModem.DCB
Win32_POTSModem.Default
Win32_POTSModem.Description
Win32_POTSModem.DeviceID
Win32_POTSModem.DeviceLoader
Win32_POTSModem.DeviceType
Win32_POTSModem.DialType
Win32_POTSModem.DriverDate
Win32_POTSModem.ErrorCleared
Win32_POTSModem.ErrorControlForced
Win32_POTSModem.ErrorControlInfo
Win32_POTSModem.ErrorControlOff
Win32_POTSModem.ErrorControlOn
Win32_POTSModem.ErrorDescription
Win32_POTSModem.FlowControlHard
Win32_POTSModem.FlowControlOff
Win32_POTSModem.FlowControlSoft
Win32_POTSModem.InactivityScale
Win32_POTSModem.InactivityTimeout
Win32_POTSModem.Index
Win32_POTSModem.InstallDate
Win32_POTSModem.LastErrorCode
Win32_POTSModem.MaxBaudRateToPhone
Win32_POTSModem.MaxBaudRateToSerialPort
Win32_POTSModem.MaxNumberOfPasswords
Win32_POTSModem.Model
Win32_POTSModem.ModemInfPath
Win32_POTSModem.ModemInfSection
Win32_POTSModem.ModulationBell
Win32_POTSModem.ModulationCCITT
Win32_POTSModem.ModulationScheme
Win32_POTSModem.Name
Win32_POTSModem.PNPDeviceID
Win32_POTSModem.PortSubClass
Win32_POTSModem.PowerManagementCapabilities
Win32_POTSModem.PowerManagementSupported
Win32_POTSModem.Prefix
Win32_POTSModem.Properties
Win32_POTSModem.ProviderName
Win32_POTSModem.Pulse
Win32_POTSModem.Reset
Win32_POTSModem.ResponsesKeyName
Win32_POTSModem.RingsBeforeAnswer
Win32_POTSModem.SpeakerModeDial
Win32_POTSModem.SpeakerModeOff
Win32_POTSModem.SpeakerModeOn
Win32_POTSModem.SpeakerModeSetup
Win32_POTSModem.SpeakerVolumeHigh
Win32_POTSModem.SpeakerVolumeInfo
Win32_POTSModem.SpeakerVolumeLow
Win32_POTSModem.SpeakerVolumeMed
Win32_POTSModem.Status
Win32_POTSModem.StatusInfo
Win32_POTSModem.StringFormat
Win32_POTSModem.SupportsCallback
Win32_POTSModem.SupportsSynchronousConnect
Win32_POTSModem.SystemCreationClassName
Win32_POTSModem.SystemName
Win32_POTSModem.Terminator
Win32_POTSModem.TimeOfLastReset
Win32_POTSModem.Tone
Win32_POTSModem.VoiceSwitchFeature

WMI is a huge subject, so therefore it is practically impossible to provide a comprehensive example program that covers anything. However, the book �Network programming in .NET� (Buy at Amazon UK) (Buy at Amazon US) covers a much wider scope of WMI, and explains how to leverage it to access the bounty of information held within this vast, yet simple object model.

Articles

Contact us

Please use FireFox to view this page

WMI class ' Win32_POTSModem ' reference for C# and VB.NET

MOF Reference

Class properties: