wmi Win32_PerfRawData_Tcpip_ICMP reference for Network Programming in .NET with C# & Visual Basic .NET (VB.NET)

WMI class ' Win32_PerfRawData_Tcpip_ICMP ' reference for C# and VB.NET

MOF Reference

[Description("The ICMP performance object consists of counters that measure the rates at which messages are sent and received by using ICMP protocols.  It also includes counters that monitor ICMP protocol errors."): ToInstance Amended, Amendment, locale(1033): ToInstance, DisplayName("ICMP"): ToInstance Amended, genericperfctr: ToInstance]
class Win32_PerfRawData_Tcpip_ICMP : Win32_PerfRawData
{
	[DisplayName("Messages Outbound Errors"): ToInstance Amended, Description("Messages Outbound Errors is the number of ICMP messages that were not send due to problems within ICMP, such as lack of buffers.  This value does not include errors discovered outside the ICMP layer, such as those recording the failure of IP to route the resultant datagram.  In some implementations, none of the error types are included in the value of this counter."): ToInstance Amended] uint32 MessagesOutboundErrors;
	[DisplayName("Messages/sec"): ToInstance Amended, Description("Messages/sec is the total rate, in incidents per second, at which ICMP messages were sent and received by the entity. The rate includes messages received or sent in error."): ToInstance Amended] uint32 MessagesPersec;
	[DisplayName("Messages Received Errors"): ToInstance Amended, Description("Messages Received Errors is the number of ICMP messages that the entity received but had errors, such as bad ICMP checksums, bad length, etc."): ToInstance Amended] uint32 MessagesReceivedErrors;
	[DisplayName("Messages Received/sec"): ToInstance Amended, Description("Messages Received/sec is the rate, in incidents per second at which ICMP messages were received. The rate includes messages received in error."): ToInstance Amended] uint32 MessagesReceivedPersec;
	[DisplayName("Messages Sent/sec"): ToInstance Amended, Description("Messages Sent/sec is the rate, in incidents per second, at which the server attempted to send. The rate includes those messages sent in error."): ToInstance Amended] uint32 MessagesSentPersec;
	[DisplayName("Received Address Mask"): ToInstance Amended, Description("Received Address Mask is the number of ICMP Address Mask Request messages received."): ToInstance Amended] uint32 ReceivedAddressMask;
	[DisplayName("Received Address Mask Reply"): ToInstance Amended, Description("Received Address Mask Reply is the number of ICMP Address Mask Reply messages received."): ToInstance Amended] uint32 ReceivedAddressMaskReply;
	[DisplayName("Received Dest. Unreachable"): ToInstance Amended, Description("Received Destination Unreachable is the number of ICMP Destination Unreachable messages received."): ToInstance Amended] uint32 ReceivedDestUnreachable;
	[DisplayName("Received Echo/sec"): ToInstance Amended, Description("Received Echo/sec is the rate, in incidents per second, at which ICMP Echo messages were received."): ToInstance Amended] uint32 ReceivedEchoPersec;
	[DisplayName("Received Echo Reply/sec"): ToInstance Amended, Description("Received Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were received."): ToInstance Amended] uint32 ReceivedEchoReplyPersec;
	[DisplayName("Received Parameter Problem"): ToInstance Amended, Description("Received Parameter Problem is the number of ICMP Parameter Problem messages received."): ToInstance Amended] uint32 ReceivedParameterProblem;
	[DisplayName("Received Redirect/sec"): ToInstance Amended, Description("Received Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were received."): ToInstance Amended] uint32 ReceivedRedirectPersec;
	[DisplayName("Received Source Quench"): ToInstance Amended, Description("Received Source Quench is the number of ICMP Source Quench messages received."): ToInstance Amended] uint32 ReceivedSourceQuench;
	[DisplayName("Received Time Exceeded"): ToInstance Amended, Description("Received Time Exceeded is the number of ICMP Time Exceeded messages received."): ToInstance Amended] uint32 ReceivedTimeExceeded;
	[DisplayName("Received Timestamp/sec"): ToInstance Amended, Description("Received Timestamp/sec is the rate, in incidents per second at which ICMP Timestamp Request messages were received."): ToInstance Amended] uint32 ReceivedTimestampPersec;
	[DisplayName("Received Timestamp Reply/sec"): ToInstance Amended, Description("Received Timestamp Reply/sec is the rate of ICMP Timestamp Reply messages received."): ToInstance Amended] uint32 ReceivedTimestampReplyPersec;
	[DisplayName("Sent Address Mask"): ToInstance Amended, Description("Sent Address Mask is the number of ICMP Address Mask Request messages sent."): ToInstance Amended] uint32 SentAddressMask;
	[DisplayName("Sent Address Mask Reply"): ToInstance Amended, Description("Sent Address Mask Reply is the number of ICMP Address Mask Reply messages sent."): ToInstance Amended] uint32 SentAddressMaskReply;
	[DisplayName("Sent Destination Unreachable"): ToInstance Amended, Description("Sent Destination Unreachable is the number of ICMP Destination Unreachable messages sent."): ToInstance Amended] uint32 SentDestinationUnreachable;
	[DisplayName("Sent Echo/sec"): ToInstance Amended, Description("Sent Echo/sec is the rate of ICMP Echo messages sent."): ToInstance Amended] uint32 SentEchoPersec;
	[DisplayName("Sent Echo Reply/sec"): ToInstance Amended, Description("Sent Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were sent."): ToInstance Amended] uint32 SentEchoReplyPersec;
	[DisplayName("Sent Parameter Problem"): ToInstance Amended, Description("Sent Parameter Problem is the number of ICMP Parameter Problem messages sent."): ToInstance Amended] uint32 SentParameterProblem;
	[DisplayName("Sent Redirect/sec"): ToInstance Amended, Description("Sent Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were sent."): ToInstance Amended] uint32 SentRedirectPersec;
	[DisplayName("Sent Source Quench"): ToInstance Amended, Description("Sent Source Quench is the number of ICMP Source Quench messages sent."): ToInstance Amended] uint32 SentSourceQuench;
	[DisplayName("Sent Time Exceeded"): ToInstance Amended, Description("Sent Time Exceeded is the number of ICMP Time Exceeded messages sent."): ToInstance Amended] uint32 SentTimeExceeded;
	[DisplayName("Sent Timestamp/sec"): ToInstance Amended, Description("Sent Timestamp/sec is the rate, in incidents per second, at which ICMP Timestamp Request messages were sent."): ToInstance Amended] uint32 SentTimestampPersec;
	[DisplayName("Sent Timestamp Reply/sec"): ToInstance Amended, Description("Sent Timestamp Reply/sec is the rate, in incidents per second,  at which ICMP Timestamp Reply messages were sent."): ToInstance Amended] uint32 SentTimestampReplyPersec;
};

Class properties:

Win32_PerfRawData_Tcpip_ICMP.Caption
Win32_PerfRawData_Tcpip_ICMP.Description
Win32_PerfRawData_Tcpip_ICMP.Frequency_Object
Win32_PerfRawData_Tcpip_ICMP.Frequency_PerfTime
Win32_PerfRawData_Tcpip_ICMP.Frequency_Sys100NS
Win32_PerfRawData_Tcpip_ICMP.MessagesOutboundErrors
Win32_PerfRawData_Tcpip_ICMP.MessagesPersec
Win32_PerfRawData_Tcpip_ICMP.MessagesReceivedErrors
Win32_PerfRawData_Tcpip_ICMP.MessagesReceivedPersec
Win32_PerfRawData_Tcpip_ICMP.MessagesSentPersec
Win32_PerfRawData_Tcpip_ICMP.Name
Win32_PerfRawData_Tcpip_ICMP.ReceivedAddressMask
Win32_PerfRawData_Tcpip_ICMP.ReceivedAddressMaskReply
Win32_PerfRawData_Tcpip_ICMP.ReceivedDestUnreachable
Win32_PerfRawData_Tcpip_ICMP.ReceivedEchoPersec
Win32_PerfRawData_Tcpip_ICMP.ReceivedEchoReplyPersec
Win32_PerfRawData_Tcpip_ICMP.ReceivedParameterProblem
Win32_PerfRawData_Tcpip_ICMP.ReceivedRedirectPersec
Win32_PerfRawData_Tcpip_ICMP.ReceivedSourceQuench
Win32_PerfRawData_Tcpip_ICMP.ReceivedTimeExceeded
Win32_PerfRawData_Tcpip_ICMP.ReceivedTimestampPersec
Win32_PerfRawData_Tcpip_ICMP.ReceivedTimestampReplyPersec
Win32_PerfRawData_Tcpip_ICMP.SentAddressMask
Win32_PerfRawData_Tcpip_ICMP.SentAddressMaskReply
Win32_PerfRawData_Tcpip_ICMP.SentDestinationUnreachable
Win32_PerfRawData_Tcpip_ICMP.SentEchoPersec
Win32_PerfRawData_Tcpip_ICMP.SentEchoReplyPersec
Win32_PerfRawData_Tcpip_ICMP.SentParameterProblem
Win32_PerfRawData_Tcpip_ICMP.SentRedirectPersec
Win32_PerfRawData_Tcpip_ICMP.SentSourceQuench
Win32_PerfRawData_Tcpip_ICMP.SentTimeExceeded
Win32_PerfRawData_Tcpip_ICMP.SentTimestampPersec
Win32_PerfRawData_Tcpip_ICMP.SentTimestampReplyPersec
Win32_PerfRawData_Tcpip_ICMP.Timestamp_Object
Win32_PerfRawData_Tcpip_ICMP.Timestamp_PerfTime
Win32_PerfRawData_Tcpip_ICMP.Timestamp_Sys100NS

WMI is a huge subject, so therefore it is practically impossible to provide a comprehensive example program that covers anything. However, the book �Network programming in .NET� (Buy at Amazon UK) (Buy at Amazon US) covers a much wider scope of WMI, and explains how to leverage it to access the bounty of information held within this vast, yet simple object model.

Articles

Contact us

Please use FireFox to view this page

WMI class ' Win32_PerfRawData_Tcpip_ICMP ' reference for C# and VB.NET

MOF Reference

Class properties: